Product name: Molybdenum Spraying Wire
Standard: ASTM B387
Material: Mo >99.95%
Density: >10.2g/cc
Molybdenum Spraying Wire Application:
Molybdenum spraying wire is used as a thin coating on the surface of automobile components subjected to wear, such as piston rings, gearbox synchromesh parts, selector forks, etc. Molybdenum spraying wire is also sprayed onto machine parts such as bearing for repair purposes.
Molybdenum Spraying Wire Specification:
1. The weight of a single wire is up to 20-25kg without any welded joint
2. Diameter: 3.17mm, 2.3mm
3. Tolerance: 3.17mm, +/-0.05mm; 2.3mm, +/-0.025mm
4. Tensile strength: >700-900MPa
5. Elongation: >20-5%
Molybdenum Spraying Wire Composition:
Grade
|
Mo-1
|
Grade
|
Mo-1
|
The impurity content is not more than %
|
Pb
|
--
|
The impurity content is not more than %
|
Si
|
0.003
|
Bi
|
--
|
Ca
|
0.002
|
Sn
|
--
|
Mg
|
0.002
|
Sb
|
--
|
P
|
0.001
|
Cd
|
--
|
C
|
0.020
|
Fe
|
0.006
|
O
|
0.003
|
Ni
|
0.003
|
N
|
0.003
|
Al
|
0.002
|
--
|
--
|
Molybdenum Spraying Wire Appearance:
The molybdenum spraying wire is covered with graphite. After removing graphite, it is a metallic luster.